The TEST DISPENSE command allows the user to dispense note(s) from each installed and operational cassette into the reject cassette. No notes are sent to the exit. TEST DISPENSE can only be exercised on the cassettes installed.

Once the cassette option is selected, the user is prompted to enter the number of note(s) to be dispensed from cassette A through D, if applicable. The values for the number of notes are 1 to 5. If the user enters a number greater than 5, it will automatically default to 5.

Press the number on the keypad for the cassette(s) and enter the desired value. Press ENTER. Repeat for the remaining cassettes that are available.

Next, press the ENTER key to perform the test. The dispenser will dispense the note(s) from the cassette(s) into the reject cassette, compartment, or reject vault, if applicable.

When the test is completed, the user will be prompted that test was completed successfully.