(The following is from the Triton XScale/X2 Configuration Manual.)
The NMD dispensing mechanisms use cassettes that possess onboard memory. This memory enables a cassette to store its own identification (ID) code. The INJECT NEW CASSETTE ID function has no direct correlation to the physical position of the cassette within the unit. In most instances, the cassette identified as “A” will be placed in the top feed channel, “B” in the second, and continuing. This is not a requirement since the ID code allows the dispensing mechanism (and the dispensers central controller) to locate the cassette wherever it’s been placed in the dispenser.
This function allows injecting a new ID into a cassette. Insert the cassette you want to ID into the top feed channel. Press the button corresponding to the identity you want the cassette to have: ‘A’, ‘B’, ‘C’, or ‘D’.
When the ID has successfully been injected, a message prompt will appear. If the operation fails, an error message will appear. After successfully completing the ID injection, you can place the cassette in its normal operating position.
