Click on the appropriate number above to advance to the submenu.
|
Maximum Non-Cash Description Maximum Non-Cash is only active when a dispenser is available and set up for non-cash output. This option sets the maximum non-cash purchase limit before any purchases of non-cash items can be completed. This amount is the maximum allowed for non-cash items. The amount entered must be an even multiple of the value of a single unit of non-cash purchases in the cassette. The value is in dollar amounts only; no cents are allowed. Enter the maximum amount value. Press ENTER when completed. |
|
|
Mix Method Description (Press keypad # to make selection.) This option allows selecting the pick method for dispensers that use multiple cassettes with the same denomination. The available selections are MINIMIZE and MINIMIZE EW (EvenWear).
Press 3 to toggle between the two choices. When Minimize is selected, it minimizes the number of bills dispensed, and when more than one cassette has the same bill denomination, one cassette is depleted before the other cassette is used. For example: A three (3) cassette cash dispenser has 1 cassette with $10 bills in cassette A and $20 bills in cassettes B and C. A request for $150 dollars would be filled with 1 bill from cassette A and 7 bills from from cassette B unless cassette B was out of money, in which case the bills would come from cassette C. When Minimize EW is selected, the terminal rotates which cassette with the same denomination is used, by transaction, because picking multiple notes from one cassette is quicker than picking the same number of notes from multiple cassettes. After every restart, the terminal will start its rotation from the same cassette. Examples: 1) Terminal 1 has two cassettes (A and B) with the same denomination. The first transaction after a terminal restart will always use casssette A. The second will use cassette B and subsequent transactions will continue to alternate between the two cassettes. 2) Terminal 2 has four cassettes (A, B, C, and D) with the same denomination. The first transaction after a terminal restart will always use cassette A; the second, cassette B, the third cassette C, the fourth cassette D, and the fifth would restart the pattern at cassette A. |
|
|
Currency Configuration (Inactive) |